Blend All in One Polish With Carnauba & SiO2

Blend All In One is a single step polishing compound that also promotes protection for the paint. It protects the paint for up to 4 months and combines the gloss of carnauba with the ceramic resistance of SiO2, in addition to a significant water beading effect.

Its high cutting power eliminates medium to severe swirls and marks (comparable to P2000 or finer sandpapers), leaving an excellent finish at the same time.

- Non-dusting

- High cutting power

- Up to 4 months of protection

- Excellent finish

- Can be used with different pads

- Can be used by hand or with the polisher (for best results we recommend using the polisher)

- Provides an amazing water beading effect to the paint

HOW TO USE:

1. Shake the product well before use.
2. Apply 4 to 5 drops on the polishing pad and spread the product evenly.
3. Start polishing with a Rotary Polisher using rotation between 800 to 1800RPM or speed 3000 to 4800 OPM if you are using a Dual Action Polisher, not exceeding an area of 60cm x 60cm (2′ x 2′).
4. After that, wipe off the product using a soft microfiber towel.
5. If necessary, repeat the process until achieving the desired shine and finishing.
   
   
   

NOTE:

If you want to do the water beading test, allow at least 1 hour of the application. Depending on how bad the paint is and the type of clear coat, choose the polishing pad that will best adapt to the process doing a spot test before starting the polishing. Usually, excellent results are obtained using a medium-cut pad, but the professional can use pads with more aggressive cutting power if necessary. In case of cutting with a very aggressive pad, another pass with a medium-cut pad may be required to achieve an excellent finish. To help maintain protection and shine, we recommend using Blend Ceramic & Carnauba Paste Wax or Blend Ceramic & Carnauba Spray Wax.